F and FL Series Bodies

Warren Frame “F ” and frameless “FL” Series dump bodies are designed for mounting on heavy duty tandem and tri-axle truck chassis.

Features & Benefits of Warren F & FL Series Bodies

  • ASTM A1011 A-45 High Tensile Steel
  • Body & NTEA rated hoist manufactured by Warren
  • Continuous welding throughout body for additional strength
  • Available in 12′-18′ lengths
  • Boxed tubular top rail
  • Full depth rear corner post

F & FL Series Specifications

Construction:
ASTM A1011 A-45 High Tensile Steel
Understructure:
4” – 5.4#/ft. channel crossmembers on 12″ centers
5″ – 6.7#/ft channel longitudinals (12′-14′ F Series)
5” – 9.0#/ft channel longitudinals  (15′-16′ F Series)
7″ – 9.8#/ft channel longitudinals (12-14′ FL Series)
7″ – 12.25#/ft channel longitudinals (15′-18′ FL Series)
Floor:
3/16″ Steel
Sides:
10 ga. steel
6″ wide boxed vertical side braces
10″ wrap around front corner posts
8″ high front & rear board pockets
Tailgate:
10 ga. steel – 9 panel braced
8″ higher than sides
Air operated control lock
Double lower sockets w/ overhooks
Front Bulkhead:
10 ga. steel w/ 2 die-formed horizontal braces
Dog house w/ access door
Dimensions:
Overall Width: 96″
Inside Width: 87″
Lengths –12′, 13′, 14′, 15′, 16′, 17′, 18′

Hoists

Type:
Model:
Pivot Pin:
Mounting Height:Cylinder:
Barrel O.D.:
Type:
Stroke:
Disp. (cu. in.)

Telescopic sub-frame on F Series; Frameless on FL Series
VTW-63 Sub Frame OR VTLW-63 Frameless
1 15/16″
12 1/4″ VTW; 11 1/2″ VTLW

7 1/8″
3 Active Sleeves
97″, 110″, 126″, 142″
1950, 2210, 2538

Optional Attachments

Lights/Reflectors
Tarp System
Spreader Apron
Coal Door