MSFL Series Bodies

Warren MSFL Series dump bodies are designed for mounting on heavy duty tandem and tri-axle truck chassis. They have strong “Stacked Type” under-structure for extended life. These bodies are engineered for contractors and governmental agencies for hauling sand, gravel, asphalt mix, and other materials.

Download Literature

Features & Benefits of Warren MSFL Series Bodies

ASTM A1011 A-45 High Tensile Steel
Body & NTEA rated hoist manufactured by Warren
Continuous welding throughout body for additional strength
Available in 12’-20’ lengths
10″ wrap around front corner post
Full depth rear corner post
6″ wide vertical and horizontal side braces

MSFL Series Standard Specifications

Construction:	ASTM A1011 A-45 High Tensile Steel
Understructure:	4″ – 5.4#/ft channel crossmembers on 12″ centers 7″ – 12.5#/ft channel longitudinals
Floor:	3/16″ Steel w radius edges
Sides:	10 ga. steel w/ 4 x 4 x 1/8″ boxed tubing top rail 6″ wide vertical and horizontal supports Horizontal side braces and 1/4″ x 2″ tarp rail Full depth rear corner posts and skirt 10″ wrap around front corner posts Dirt shedding rub rails
Tailgate:	10 ga. steel 9-panel with 6″ slope 6″ higher than sides Air operated control lock Double lower sockets w/ overhooks
Spreader Apron:	Standard 8″ weld-on
Front Bulkhead:	10 ga. steel w/ horizontal braces Dog house w/ access door
Dimensions:	Overall Width: 96″ Inside Width: 87″ Lengths –14′, 15′, 16′, 17′, 18′, 19′, 20′

Hoists:

Type:	Telescopic sub-framless hoist
Mounting Height:	11″
Models:	VTLW-12 with 63101 Cylinder
	VTLW-13 with 63110 Cylinder
	VTLW-14 with 63110 Cylinder
	VTLW-15 with 63124 Cylinder
	VTLW-16 with 63124 or 74135 Cylinder
	VTLW-17 with 74135 Cylinder
	VTLW-18 with 74170 Cylinder
	VTLW-19 with 74170 Cylinder
	VTLW-20 with 74170 or 85190 Cylinder

Options:

7GA, 3/16″, or 1/4″ Construction
3/16″ or 1/4″ AR-450 Construction
8″ or 10″ HD Push Aprons
Custom Cab Shields
Pintle Plates and Hitches
Electric Tarp Systems
Custom Paint
Customer LED Lights