Single Axle Front Mount Frame and Frameless Hoists

Description

Warren single axle, front mounted telescopic hoists are designed for use with 9 and 10 foot bodies mounted on trucks having 72 and 84 inch cab to axle dimensions. Light in weight with sturdy construction, these hoists place the weight well forward on the front axle of the truck. Superior construction and fewer parts mean long life and low maintenance costs.

Three stage telescopic cylinders are made from high strength, thick walled steel tubing. The steel tube bearing extends full width of cylinder base, providing maximum stability during the hoisting operation.

High pressure hydraulic system gives payload capacity and speed of operation. High volume oil reservoir tank insures smooth performance. Steel hoist frame distributes load uniformly over entire truck frame.

Models

T/TCL-5373
T/TCL-5385
T/TCL-6385
T9-5373
T10-5385
T10-6385

Hoist

Frametype	T9-5373	T10-5385	T10-6385
Frameless	TCL-5373	TCL-5385	TCL-6385
NTEA Class	60	70	80
Subframe – Frametype	8 ga. Formed Channel	8 ga. Formed Channel	8 ga. Formed Channel
Frametype	1-1/2″	1-1/2″	1-1/2″
FFrameless – Rear	12″	12″	12″
Hinge	50	50	50
STD Pivot	13-1/4″	13-1/4″	13-1/4″
Dump Angle	11-1/4″	11-1/4″	11-1/4″
Mntg. Height (Frame)	620	645	700
Mntg. Height (Frameless)	520	545	600
Weight – Frametype (lbs.)	16.5 Gal.	16.5 Gal.	16.5 Gal.
Weight – Frameless (lbs.)	12 Gal.	14 Gal.	21 Gal.
Oil Tank Capacity	9′	10′	10′
System Capacity	T9 – 9′-30.7	T10-10′-29.4	T10-10′-48.6
Body Length	TCL-9′-31.1	TCL-10′-29.7	TCL-10′-49.2
Capacity (tons)

Cylinder

Model	5373	5385	6385
Barrel Outside Dia.	6-1/8″	6-1/8″	7-1/8″
Active Sleeves	3	3	3
Active Sleeve Dia.	5,4,3	5,4,3	6,5,4
Stroke	73″	85″	85″
Closed Cyl. Length	36-1/2″	40-1/2″	40-1/2″
Displacement (Cu. In.)	955	1110	1710
Top Pin Dia.	1-1/2″	1-1/2″	1-1/2″
Bottom Pin Dia.	1-15/16″	1-15/16″	1-15/16″