Dump Body of the Week
This week’s dump body of the week is a 14 ft frame type dump body sold to The Truck and Trailer Connection in Georgia. This is one of several units we have sold to them out of our Birmingham location. The Warren frame type body is mounted on a Kenworth truck.
Call us today get your own Warren Frame Type Dump Body!
Specification
The specifications for this unit are below:
| DUMP BODY | FRAME TYPE – 14′ |
| Yardage | 13/16 |
| Floor Material | 3/16 A1011 |
| Front / Material | 48″ 10 GA A1011 |
| Side / Material | 42″ 10 GA A1011 |
| Vertical Side Brace | Yes |
| Horizontal Brace | Yes |
| Hoist / Cylinder | VTW-63110 |
| Hydraulics | Yes |
OPTIONS |
|
|---|---|
| Hydraulic Hoses/Fittings | Yes |
| Pump | 22 gal CCW |
| Console | Air/Air |
| Conspicuity Tape | No |
| Mudflaps and Brackets | Yes |
| Chrome Turnouts | No |
| Splash/Gravel Guards | No |
| Wires in Conduit | Yes |
| Side Boards | None |
TAILGATE |
|
|---|---|
| Air Operated | Yes |
| Panel | 9 |
| Material | 10 GA A1011 |
| Height | 48 |
| Slope | None |
| Chains | 5/16″ |
| Double Acting | No |
| High Lift Gate | No |
| Side Swing – Ground Operated | No |
PAINT |
|
|---|---|
| Color | Warren Black |
TARP SYSTEM |
|
|---|---|
| TARP system | installed |
| Brand | Donovan |
| Manual / Electric | Electric |
| Type | Arm |
| Aluminum / Steel | Aluminum |
| Bent Arm | No |
| Tarp Size | 90″x17′ |
| Tarp Type | Asphalt |
DB Options #1 |
|
|---|---|
| Cabshield | Full Width-1/2 (24″) |
| BAsphalt Apron | 8″ |
| Bolt On | No |
| Center Board Pockets | No |
DB Options #2 |
|
|---|---|
| 2 Driver Side & Passenger Side Step 1/4 x 2 Tarp Tie Rail | |
| D Rings | Yes |
| Tow Hooks | No |
| Electric Plug | 7 Way |
| Pup Rigging | No |
PTO POWER TAKE OFF |
|
|---|---|
| PTO Muncie TG6 Series | |
TOW PACKAGE |
|
|---|---|
| Lights | LED Standard |
| Pintle Plate | 3/4″ |
| Pintle Hitch | 30 Ton |
| Oval S/T/T | None |
| Glad Hands | Yes |
Our F-type, or frame type, dump body is ideal for light to medium duty hauling. We can customize this model with ¼’’ or AR-450 floor for heavier duty application needs.